Do you need more than one temperature zone controlled from one system?
Do you need different sized heaters?
Do you have a system with more than five floor loops?
Do you need a heftier circulating pump or more than one pump?
If your answer to any such questions is "yes", we can help. However more complex systems are not suitable for the do-it-yourself installer. They require the trade knowledge, training, experience and tools of a plumbing/heating contractor. Read on.....
IF YOU ARE A HVAC CONTRACTOR -
Start with the wall-mounted Hydronic Radiant Center (HRC). We then supply full-featured manifolds, the controls needed for multiple zones and whatever other unique parts are needed for the project - parts that you don't commonly stock on your shop shelves.
Apply your trade background for a complete hydronic radiant floor heating system ready to connect to radiant floor tubing.We also supply 1/2" or 5/8" PEX tubing in either 300-ft. or 1000-ft. lengths. Contact us for details.
Click on the images for more details.
HYDRONIC RADIANT CENTER
FULL-FEATURED MANIFOLD
THERMOSTAT
MOTORIZED VALVE ACTUATOR
CIRCULATOR PUMP
The Hydronic Radiant Center is available in thirteen models providing a wide selection of heating capacities and appropriately sized circulator pumps. The chart below shows electric power requirements.
MODEL
MODEL
OUTPUT (kW)
OUTPUT (BTU/h)
BREAKER AMPS
HRC1542-5
HRC2699-5
5
17,060
30
HRC1542-7
HRC2699-7
7
23,890
40
HRC1542-9
HRC2699-9
9
30,710
50
HRC1542-11
HRC2699-11
11
37,540
60
HRC1542-14
HRC2699-14
14
47,780
80 (two 40)
HRC2699-18
18
61,430
100 (two 50)
HRC2699-22
22
75,080
120 (two 60)
HRC2699-28
28
95,560
160 (four 40)
Remember that Not-so-Simple systems are unsuitable for Do-it-Yourself installations. Therefore, homeowners pursuing this approach should have their local contractor contact us by phone or e-mail to order appropriate material.
